Location of SL-PopUp.exe. This file is started every time a interactive
user loges on. If you don't want to display messages, you should clear this
value (e.g. Network server). If you don't want messages, you should also
delete SL-PopUp.exe from the computer.
Default: REG_EXPAND_SZ = %Systemroot%\SYSTEM32\SL-PopUp.exe
Every time a client requests new messages at startup, this request is
logged into NT eventlog, Set this value to "0" to reduce the size of the
eventlog.
Default: REG_SZ = 1
If this value is "1", the computer sends a sync request to the machine
specified by SyncSource. If you don't want this, set SyncRequest to
"0"
Default: REG_SZ = 1
Specifies the computer which should be ask whether new messages were sent
while the local computer was switched off. You may set this value to "*" if
a broadcast should be sent. Otherwise set this value to a specific computer
(e.g. network server) which runs 7x24 hours.
Default: REG_SZ = *
Set this value to "1" if you want the computer to
replicate messages to ReplicateDst.
This value is useful if your network configuration does not allow broadcasts
between segments / subnets.
Default: REG_SZ = 0
Interval to synchronize time from SetTimeSource in seconds. If this value
is 0, synchronization is performed only once at system startup.
Default: REG_SZ = 0
If this value is "1", SL-Listen will try to receive messages sent by "net
send". You should disable the Windows messenger service if you want
SL-Listen to process the messages. At this time, only messages sent to
Workgroups/Domains or "*" are handled correctly.
Default: REG_SZ = 0
Language of SL-Listen eventlog entries. The following languages are
available yet:
0x407 = German messages
0x409 = English messages
If you want to translate messages to you native
language, please contact us at
info@selisoft.com. You will get free license-keys if you help us
translating SL-Message to other languages
Default: REG_DWORD = (depends on the language of the operating
system)
